Garmin GTR200 VHF Comm (Non TSO'd)

Garmin GTR200 VHF Comm (Non TSO'd)

Now NZCAA Approved for Level 2 (VFR Only) installations in certified aircraft.

Features:

• slim design
• advanced auto-squelch
• 3D audio
• stereo intercom
• stereo music input
• alert inputs
• best-in-class standby frequency monitoring
• on-screen frequency identification

The GTR 200 is the first to integrate advanced audio panel features like a two place auto-squelch stereo intercom, which senses the amount of sound in the cockpit and automatically adjusts the mic squelch for effortless intercom use regardless of the cockpit noise level.

With 3D audio, the GTR 200 makes it easy to discern between the active and monitored standby frequencies as well as the other passengers.

The radio’s best-in-class standby monitor is enhanced with patent-pending digital processing, so it seems as though there are two radios in one.

With its advanced integration with the Garmin G3X glass flight display, or other compatible Garmin portable products (see list on Page 2), the GTR 200 is able to receive a frequency and identifier in the comm’s standby position directly from the G3X’s waypoint page, allowing the pilot to ensure accurate transfer and reduce workload. This same integration, automatically, and without the need for a database, displays the airport identifier and type on the GTR 200, like “KOSH ATIS” should the pilot manually tune the frequency.

And further, these compatible Garmin portable products (Listed below), constantly stream the flight plan and nearest airports to the GTR 200 for quick access and retrieval of any airport frequency with a single push of the knob. 

Accessing these features on the GTR 200 is extremely easy and intuitive, with a sunlight readable display and built-in shortcuts including configurable soft keys to help reduce cockpit workload (for example, configuring one-touch access to music mute or pilot isolate).

Optionally installed switches, typically on the flight controls, allow pilots to keep their hands on the controls while performing functions like swapping active and standby frequencies.

For easy retrieval of the most commonly used frequencies, the GTR 200 stores up to 20 pilot-defined frequencies as well as the 20 most recent frequencies used for easy retrieval.

The radios are easy to install, with a standard density 37 pin connector and they support both 14 and 28 volt aircraft and offer 25 kHz channel spacing. 

Compatible GPS Products:

• GPSMAP 696
• GPSMAP 695
• Aera 796
• Aera 795
• Aera 560
• Aera 550
• Aera 510
• Aera 500
• G3X
• GPSMAP 495
• GPSMAP296

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

File Name	Size	Link